No products in the cart.
- Ballnose Endmill 4 Flute
- Suitable for materials up to 1600 N/mm2
- Increased feed rates than 2 flute variety
| End Mill | D1 | Rad | I1 | I2 | I3 | D2 | D3 | Z |
|---|---|---|---|---|---|---|---|---|
| E6060100 | 1 | .5 | 38 | 4 | – | 3 | – | |
| E6060150 | 1.5 | .75 | 38 | 4.5 | – | 3 | – | |
| E6060200 | 2 | 1 | 38 | 6 | – | 3 | – | |
| E6060250 | 2.5 | 1.25 | 38 | 9.5 | – | 3 | – | |
| E6060300 | 3 | 1.5 | 38 | 12 | – | 3 | – | |
| E6060400 | 4 | 2 | 50 | 14 | – | 4 | – | |
| E6060500 | 5 | 2.5 | 50 | 16 | – | 5 | – | |
| E6060600 | 6 | 3 | 50 | 19 | – | 6 | – | |
| E6060800 | 8 | 4 | 63 | 19 | – | 8 | – | |
| E6061000 | 10 | 5 | 63 | 20 | – | 10 | – | |
| E6061200 | 12 | 6 | 75 | 20 | – | 12 | – |